General automation accessories

  • BBASL07N – MECHANICAL EDGE FOR GARAGE DOORS

    BBASL07N – MECHANICAL EDGE FOR GARAGE DOORS

    BBASL07N – 0.7 -METER MECHANICAL EDGE CONTACT N.C. – SAFETY DEVICES FOR GARAGE DOORS
    BBASL10N – 1.0 -METER MECHANICAL EDGE CONTACT N.C. – SAFETY DEVICES FOR GARAGE DOORS
    BBASL12N – 1.2 -METER MECHANICAL EDGE CONTACT N.C. – SAFETY DEVICES FOR GARAGE DOORS
    BBASL18N – 1.8 -METER MECHANICAL EDGE CONTACT N.C. – SAFETY DEVICES FOR GARAGE DOORS

    MECHANICAL AUXILIARY DEVICES FOR SWING / SLIDING GATES
    High profile 61mm – contact output N.C. – colour black.

    Safety edge for garage doors N.C. contact

    This mechanical device is an extremely versatile safety edge in aluminium that can be fitted to
    overhead garage doors, rolling shutters and other industrial closing devices. The edges are fitted with
    sealed micro-switches and have a series of accessories permitting a variety of combinations and uses.

    57,0093,00 + TAX
  • BSH95L16 CONDUCTIVE SAFETY EDGE 8,2kΩ

    BSH95L16 – CONDUCTIVE SAFETY EDGE 8,2kΩ

    BSH95L16  – 1.6-METER CONDUCTIVE SAFETY EDGE (PROFILE 95mm) – SAFETY DEVICES
    BSH95L20 – 2.0-METER CONDUCTIVE SAFETY EDGE (PROFILE 95mm) – SAFETY DEVICES
    BSH95L25 – 2.5-METER CONDUCTIVE SAFETY EDGE (PROFILE 95mm) – SAFETY DEVICES
    BSH61L16  – 1.6-METER CONDUCTIVE SAFETY EDGE (PROFILE 61mm) – SAFETY DEVICES
    BSH61L20 – 2.0-METER CONDUCTIVE SAFETY EDGE (PROFILE 61mm) – SAFETY DEVICES
    BSH61L25 – 2.5-METER CONDUCTIVE SAFETY EDGE (PROFILE 61mm) – SAFETY DEVICES

    CONDUCTIVE SAFETY EDGE – SAFETY DEVICES 8,2kΩ FOR SWING AND SLIDING GATES
    High profile 95mm / low 61mm – contact 8,2kΩ with maximum detection speed 12 m/min – colour black

    Conductive safety edge 8,2kΩ contact

    The safety edges are used to eliminate the risk of crushing or shearing
    caused by sliding doors, bulkheads, automatic gates etc. and respect the
    requirements of the impact curve as stipulated in EN12453. The edges are
    made up of a C-shaped aluminium support and a PVC profile in which a
    safety sensor has been inserted. When the profile is deformed or crushed
    the two metal contacts of the sensor come into contact causing the alarm
    situation. The ample height of the rubber profile and the insert in conductive
    rubber allow rapid intervention times fully respecting the standards and
    regulations in force.

    86,00134,00 + TAX

    BSH95L16 CONDUCTIVE SAFETY EDGE 8,2kΩ

    86,00134,00 + TAX
  • CB24

    CB24

    CB24 24 V battery charger.
    BATTERY CHARGER CB24 24V to be used with 24 V control units  T124 o T624.
    In addition to the charger, you need to buy:
    1 – SPB24
    2 – BAT12V2A

  • CP30BL – PASSIVE IMPACT EDGE

    CP30BL – PASSIVE IMPACT EDGE

    BP20BL – 2-METER PASSIVE IMPACT EDGE (PROFILE 70mm) – SAFETY DEVICES
    CP30BL – 3-METER PASSIVE IMPACT EDGE (PROFILE 30mm) – SAFETY DEVICES
    CP40BL – 4-METER PASSIVE IMPACT EDGE (PROFILE 30mm) – SAFETY DEVICES
    CP50BL – 5-METER PASSIVE IMPACT EDGE (PROFILE 30mm) – SAFETY DEVICES

    PASSIVE IMPACT EDGE  – PASSIVE AUXILIARY DEVICES FOR SWING AND SLIDING GATES
    High profile 70mm / low 30mm – colour black.

    Low profile / high profile passive edge

    Although it is not to be considered a safeties devices due to the absence of an electrical contact.
    he passive edge has the same dimensions and mechanical protective characteristics as
    the active safety edge and does supply valid absorption protection against impact. The
    low profile edge, which works as simple impact protection, is suitable for closing
    devices where passing room is limited.

    39,0063,00 + TAX

    CP30BL – PASSIVE IMPACT EDGE

    39,0063,00 + TAX
  • CPM

    CPM

    CPM Plastic container to be walled in, for ILB SINCRO and SELCH.

  • DAMA430

    02

    DAMA 430 – Antenna for 433 MHz receivers

    DAMA430 / DAMA 430 Antenna for 433 MHz receivers
    DAMA430 OR DAMA 430 IS complete with stainless steel bracket and connection cable (3 m).

    Compatible with EDGE NOIRE FM400 TANGO receivers

  • DIVA 40

    DIVA 40

    Antenna for 40 MHz (40,665MHz) receivers
    Complete with stainless steel bracket and connection cable (3 m) for the FOX series.

  • DKS1000 – KIT KEYPAD + ITERFACE 4CH

    DKS1000 – KEYBOARD + INTERFACE KIT

    DKS1000 – KEYBOARD + INTERFACE KIT consists of two products:
    DKS1000T – BACKLIT KEYBOARD
    DKS1000R – 4CH INTERFACE

    DKS1000T – KEYPAD WITH BACKLIGHTING
    Surface-mounting IP57.
    The metal antitamper keyboard DKS1000T has 12 keys, 10 numerical (0-9), one
    confirm key (*) and one cancel key (#) by means of which it is possible to program
    the backlighting and other operational parameters.
    DKS1000R – 4 CHANNEL INTERFACE
    The interface box is easy to install and has the following features:
    – power supply 12 or 24Vac-dc;
    – 4 normally open relays (one for each channel);
    – management of up to 3 peripheral devices (keypads and/or transponder readers;
    – 1 multifunction key for the following functions: storing a code, cancelling a code,
    cancelling the entire memory content, inserting an activation code for the “remote
    memorisation” function. It is possible to store 1000 codes in memory with
    a maximum of 6 digits for each code. Each code can activate up to 4 channels
    (different functions).

  • DKS1000R – INTERFACE 4CH

    DKS1000R – INTERFACE 4CH

    DKS1000R 4-CHANNEL INTERFACE
    The interface 4CH DKS1000R box is easy to install and has the following features:
    – power supply 12 or 24Vac-dc;
    – 4 normally open relays (one for each channel);
    – management of up to 3 peripheral devices (keypads and/or transponder readers;
    – 1 multifunction key for the following functions: storing a code, cancelling a code,
    cancelling the entire memory content, inserting an activation code for the “remote
    memorisation” function. It is possible to store 1000 codes in memory with
    a maximum of 6 digits for each code. Each code can activate up to 4 channels
    (different functions).

  • DKS1000T – KEYPAD WITH BACKLIGHTING

    DKS1000T – KEYPAD WITH BACKLIGHTING

    DKS1000T – KEYPAD WITH BACKLIGHTING
    Surface-mounting IP57.
    The metal antitamper keyboard DKS1000T has 12 keys, 10 numerical (0-9), one
    confirm key (*) and one cancel key (#) by means of which it is possible to program
    the backlighting and other operational parameters. It is suitable for connection with
    the DKS security system via a shielded unipolar wire carrying both the power supply
    and the data line. It is also fitted with auxiliary serial line allowing it to connect to the
    CARHF2 system (consult the Liberté catalogue).

  • DKSDUALT – KEYPAD WITH TRANSPONDER

    DKSDUALT – KEYPAD WITH TRANSPONDER

    DKSDUALT – KEYPAD WITH TRANSPONDER FUNCTION
    The DKSDUALT – KEYPAD WITH TRANSPONDER is Surface-mounting IP57.
    The DKSDUALT device has the following features:
    – 12 keys with backlighting;
    – backlighting controlled by the proximity sensor.
    Allows the interface to be activated by either typing in a code or by proximity
    reading an S500 transmitter, a TAG or a CARD.

  • DKSTP – KIT TRANSPONDER + INTERFACE

    DKS1000T – KEYPAD WITH BACKLIGHTING

    DKS1000T – KEYPAD WITH BACKLIGHTING
    Surface-mounting IP57.
    The metal antitamper keyboard DKS1000T has 12 keys, 10 numerical (0-9), one
    confirm key (*) and one cancel key (#) by means of which it is possible to program
    the backlighting and other operational parameters. It is suitable for connection with
    the DKS security system via a shielded unipolar wire carrying both the power supply
    and the data line. It is also fitted with auxiliary serial line allowing it to connect to the
    CARHF2 system (consult the Liberté catalogue).

Main Menu