Gates Motors
-
SLX624 MOTOR
SLX824CB / SLX824 CB – ELECTROMECHANICAL UNIT WITH A 24V MOTOR
SLX824CB AUTOMATION- FAST SELF-LOCKING UNIT ENCODER 24V MAX. 800KG + NIMH BATTERIES FOR SLIDING AUTOMATION
The SLX824CB motor for sliding automation gate is made up of a self-locking gear motor (with a gate
drag speed of 13 metres/minute) controlled by magnetic encoder with an in-built:
– electronic programmer;
– 433MHz FM receiver;
– slot-in battery charger (SLX824CB – SLX1524CB);
– NiMH batteries (SLX824CB – SLX1524CB);
– reversible motor (SLX1024REV).The electronic programmer is factory fitted with a graphic LCD display
(128 x 128 pixels) with backlighting in six different languages.
The menu allows you to rapidly set the system parameters including:
the sequential button mode, automatic reclosing, warning lamp
pre-flashing, intermittent warning lamp activation, indicator light and
photoelectric cell function setting etc.The electronics card, thanks to the presence of the real-time clock,
allows you to set 10 events (shown on the display) and these events
permit you to regulate the opening and closing of the motor at
different times during the day within 3 weekly time bands (Mon-
Fri, Sat-Sun, Mon-Sun).The events can be enabled or disabled (during holiday periods)
either from the menu or by means of a radio channel.
The appliance is fitted with a safe and secure manual
release system activated by a personalised key.€426,00 + TAXSLX624 MOTOR
€426,00 + TAX -
SLX624CB MOTOR
SLX824CB / SLX824 CB – ELECTROMECHANICAL UNIT WITH A 24V MOTOR
SLX824CB AUTOMATION- FAST SELF-LOCKING UNIT ENCODER 24V MAX. 800KG + NIMH BATTERIES FOR SLIDING AUTOMATION
The SLX824CB motor for sliding automation gate is made up of a self-locking gear motor (with a gate
drag speed of 13 metres/minute) controlled by magnetic encoder with an in-built:
– electronic programmer;
– 433MHz FM receiver;
– slot-in battery charger (SLX824CB – SLX1524CB);
– NiMH batteries (SLX824CB – SLX1524CB);
– reversible motor (SLX1024REV).The electronic programmer is factory fitted with a graphic LCD display
(128 x 128 pixels) with backlighting in six different languages.
The menu allows you to rapidly set the system parameters including:
the sequential button mode, automatic reclosing, warning lamp
pre-flashing, intermittent warning lamp activation, indicator light and
photoelectric cell function setting etc.The electronics card, thanks to the presence of the real-time clock,
allows you to set 10 events (shown on the display) and these events
permit you to regulate the opening and closing of the motor at
different times during the day within 3 weekly time bands (Mon-
Fri, Sat-Sun, Mon-Sun).The events can be enabled or disabled (during holiday periods)
either from the menu or by means of a radio channel.
The appliance is fitted with a safe and secure manual
release system activated by a personalised key.€492,00 + TAXSLX624CB MOTOR
€492,00 + TAX -
SLX824
SLX824 / SLX 824 – ELECTROMECHANICAL UNIT WITH A 24V MOTOR
SLX824 AUTOMATION- FAST SELF-LOCKING UNIT ENCODER 24V MAX. 800KG + NIMH BATTERIES FOR SLIDING AUTOMATION
The SLX824 motor for sliding automation gate is made up of a self-locking gear motor (with a gate
drag speed of 13 metres/minute) controlled by magnetic encoder with an in-built:
– electronic programmer;
– 433MHz FM receiver;The electronic programmer is factory fitted with a graphic LCD display
(128 x 128 pixels) with backlighting in six different languages.
The menu allows you to rapidly set the system parameters including:
the sequential button mode, automatic reclosing, warning lamp
pre-flashing, intermittent warning lamp activation, indicator light and
photoelectric cell function setting etc.The electronics card, thanks to the presence of the real-time clock,
allows you to set 10 events (shown on the display) and these events
permit you to regulate the opening and closing of the motor at
different times during the day within 3 weekly time bands (Mon-
Fri, Sat-Sun, Mon-Sun).The events can be enabled or disabled (during holiday periods)
either from the menu or by means of a radio channel.
The appliance is fitted with a safe and secure manual
release system activated by a personalised key.€528,00 + TAXSLX824
€528,00 + TAX -
SLX824CB
SLX824CB / SLX824 CB – ELECTROMECHANICAL UNIT WITH A 24V MOTOR
SLX824CB AUTOMATION- FAST SELF-LOCKING UNIT ENCODER 24V MAX. 800KG + NIMH BATTERIES FOR SLIDING AUTOMATION
The SLX824CB motor for sliding automation gate is made up of a self-locking gear motor (with a gate
drag speed of 13 metres/minute) controlled by magnetic encoder with an in-built:
– electronic programmer;
– 433MHz FM receiver;
– slot-in battery charger (SLX824CB – SLX1524CB);
– NiMH batteries (SLX824CB – SLX1524CB);
– reversible motor (SLX1024REV).The electronic programmer is factory fitted with a graphic LCD display
(128 x 128 pixels) with backlighting in six different languages.
The menu allows you to rapidly set the system parameters including:
the sequential button mode, automatic reclosing, warning lamp
pre-flashing, intermittent warning lamp activation, indicator light and
photoelectric cell function setting etc.The electronics card, thanks to the presence of the real-time clock,
allows you to set 10 events (shown on the display) and these events
permit you to regulate the opening and closing of the motor at
different times during the day within 3 weekly time bands (Mon-
Fri, Sat-Sun, Mon-Sun).The events can be enabled or disabled (during holiday periods)
either from the menu or by means of a radio channel.
The appliance is fitted with a safe and secure manual
release system activated by a personalised key.€600,00 + TAXSLX824CB
€600,00 + TAX -
SNAP3
SNAP3 – ELECTROMECHANICAL BARRIER UP TO 3M
SNAP3 / SNAP 3 – ELECTROMECHANICAL BARRIER FOR ACCESS CONTROL UP TO 3M
Barrier SNAP 3 with enhanced electromechanical gearmotor powered at 24 Vdc.
Designed to control accesses up to 3 m with fluid and fast movements.
Snap, in addition to the new mechanical project, stands out for its advanced electronic control
unit and a complete series of accessories.Safe thanks to the precision and sensitivity of the encoder and to the acceleration and deceleration ramps.
Practice with the control unit positioned at the top, the built-in signaling LEDs
the various predispositions including the one for the two buffer batteries.
Electromechanical barrier 24 V, in sturdy steel structure.
C/w control unit and encoder.
Max boom length 3,25 m. Net span 3 m.€1.345,00 + TAXSNAP3
€1.345,00 + TAX -
SNAP4
SNAP4 – ELECTROMECHANICAL BARRIER UP TO 4M
SNAP4 / SNAP 4 – ELECTROMECHANICAL BARRIER FOR ACCESS CONTROL UP TO 4M
Barrier SNAP 4 with enhanced electromechanical gearmotor powered at 24 Vdc.
Designed to control accesses up to 4 m with fluid and fast movements.
Snap, in addition to the new mechanical project, stands out for its advanced electronic control
unit and a complete series of accessories.Safe thanks to the precision and sensitivity of the encoder and to the acceleration and deceleration ramps.
Practice with the control unit positioned at the top, the built-in signaling LEDs
the various predispositions including the one for the two buffer batteries.
Electromechanical barrier 24 V, in sturdy steel structure.
C/w control unit and encoder.
Max boom length 4,25 m. Net span 4 m.€1.225,00 + TAXSNAP4
€1.225,00 + TAX -
SNAP6
SNAP6 – ELECTROMECHANICAL BARRIER UP TO 6M
SNAP6 / SNAP 6 – ELECTROMECHANICAL BARRIER FOR ACCESS CONTROL UP TO 6M
Barrier SNAP 6 with enhanced electromechanical gearmotor powered at 24 Vdc.
Designed to control accesses up to 6 m with fluid and fast movements.
Snap, in addition to the new mechanical project, stands out for its advanced electronic control
unit and a complete series of accessories.Safe thanks to the precision and sensitivity of the encoder and to the acceleration and deceleration ramps.
Practice with the control unit positioned at the top, the built-in signaling LEDs
the various predispositions including the one for the two buffer batteries.
Electromechanical barrier 24 V, in sturdy steel structure.
C/w control unit and encoder.
Max boom length 6,25 m. Net span 6 m.€1.360,00 + TAXSNAP6
€1.360,00 + TAX -
STAR 1E24
STAR 1E24 / STAR1E24 – EELECTROMECHANICAL ACTUATOR FOR OVERHEAD DOORS
STAR 1E24 / STAR1E24 – EELECTROMECHANICAL ACTUATOR FOR OVERHEAD DOORS
Electromechanical gearmotor 24 V ideal for overhead doors up to 8 m2.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
LED courtesy light.
Versatile, with a wide choice of accessories for any installation need.STAR 1E24
24V irreversible electromechanical gearmotor.
Without control unit. -
STAR1E
STAR 1E /STAR1E – EELECTROMECHANICAL ACTUATOR FOR OVERHEAD DOORS
STAR 1E / STAR1E – EELECTROMECHANICAL ACTUATOR FOR OVERHEAD DOORS
STAR1E Electromechanical gearmotor 230 V ideal for garage counterbalanced door up to 8 m2.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
LED courtesy light.
Versatile, with a wide choice of accessories for any installation need
STAR1E
230 V STAR1E irreversible electromechanical gearmotor for garage counterbalanced door.
Without control unit.€276,00 + TAXSTAR1E
€276,00 + TAX -
STAR2AE
STAR 2AE / STAR2AE – SLAVE SELF-LOCKING SWINGING GARAGE DOOR MOTOR 230V
STAR 2AE / STAR2AE – EELECTROMECHANICAL MOTOR FOR OVERHEAD DOORS
Electromechanical gearmotor 230 V ideal for overhead doors up to 8 m2.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
LED courtesy light.
Versatile, with a wide choice of accessories for any installation need.STAR2AE
230 V irreversible electromechanical gearmotor.
Complete with electric limit switches, encoder and control unit.
With autotransformer and torque adjustment.€409,00 + TAXSTAR2AE
€409,00 + TAX -
STAR2E
STAR 2E /STAR2E – EELECTROMECHANICAL ACTUATOR FOR OVERHEAD DOORS
STAR 2E / STAR2E – EELECTROMECHANICAL ACTUATOR FOR OVERHEAD DOORS
Electromechanical gearmotor 230 V ideal for overhead doors up to 8 m2.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
LED courtesy light.
Versatile, with a wide choice of accessories for any installation need
STAR2E
230 V irreversible electromechanical gearmotor.
Complete with electric limit switches, encoder and control unit.€382,00 + TAXSTAR2E
€382,00 + TAX -
STAR2E24
STAR 2E24 / STAR2E24 – EELECTROMECHANICAL ACTUATOR FOR OVERHEAD DOORS
STAR 2E24 / STAR2E24 – EELECTROMECHANICAL ACTUATOR FOR OVERHEAD DOORS
Electromechanical STAR2E24 gearmotor 24 V ideal for overhead garage doors up to 8 m2.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
LED courtesy light.
Versatile, with a wide choice of accessories for any installation need.STAR 2E24
24V irreversible electromechanical gearmotor for garage doors.
Complete with electric limit switches, encoder and control unit.