Automation accessories: columns, photocells, flashing selectors, safety accessories
-
CK200
CK 200 / CK 200 – SENSITIVE EDGE CK200 / CK 200
CK 200 / CK 200 – SENSITIVE EDGE CK200 / CK 200
CK200 Resistive sensitive safty edge, according to the European standard EN 12978.The CK200 has To be installed with CSSENSOR electronic card.
length 200 cm, without caps.It is replaced by the new sensitive coasts:
MECHANICAL ACCESSORIES – SENSITIVE SAFTY EDGE ( RIBS) CARDIN with CODES:
NC8K2Lxxx
BBASLxxN
CPxxBL
BSHxxLxx -
CP30BL – PASSIVE IMPACT EDGE
CP30BL – PASSIVE IMPACT EDGE
BP20BL – 2-METER PASSIVE IMPACT EDGE (PROFILE 70mm) – SAFETY DEVICES
CP30BL – 3-METER PASSIVE IMPACT EDGE (PROFILE 30mm) – SAFETY DEVICES
CP40BL – 4-METER PASSIVE IMPACT EDGE (PROFILE 30mm) – SAFETY DEVICES
CP50BL – 5-METER PASSIVE IMPACT EDGE (PROFILE 30mm) – SAFETY DEVICES
PASSIVE IMPACT EDGE – PASSIVE AUXILIARY DEVICES FOR SWING AND SLIDING GATES
High profile 70mm / low 30mm – colour black.
Low profile / high profile passive edge
Although it is not to be considered a safeties devices due to the absence of an electrical contact.
he passive edge has the same dimensions and mechanical protective characteristics as
the active safety edge and does supply valid absorption protection against impact. The
low profile edge, which works as simple impact protection, is suitable for closing
devices where passing room is limited.€39,00 – €63,00 + TAXCP30BL – PASSIVE IMPACT EDGE
€39,00 – €63,00 + TAX -
CRL170 MOTOR FOR ROLLING SHUTTERS
CRL170 / CRL 170 – REVERSIBLE GEARED MOTOR FOR ROLLING SHUTTERS
CRL170 / CRL 170 SHUTTERS – REVERSIBLE GEARED MOTOR FOR ROLLING SHUTTERS
230V geared motor permitting a maximum lifting power of 180kg.
An electric lock must be fitted to guarantee that the rolling shutter
locks in the closed position.
Precise and reliable, thanks to the integrated travel limits, this model
may fitted to all types of rolling shutter with a 60mm or 48mm drive
shaft diameter and a crown wheel diameter of 200mm e 220mm.
Maximum rolling shutter height 6m.€150,00 + TAXCRL170 MOTOR FOR ROLLING SHUTTERS
€150,00 + TAX -
CS120
CS 120 / CS120 – SENSITIVE EDGE CS120 / CS 120
CS 120 / CS120 – SENSITIVE EDGE CS120 / CS 120
CS120 / cs 120 Resistive sensitive safty edge, according to the European standard EN 12978.The CS 1200 has To be installed with CSSENSOR electronic card.
length 120 cm, without caps.It is replaced by the new sensitive coasts:
MECHANICAL ACCESSORIES – SENSITIVE SAFTY EDGE ( RIBS) CARDIN with CODES:
NC8K2Lxxx
BBASLxxN
CPxxBL
BSHxxLxx -
CS180
CS 180 / CS180 – SENSITIVE EDGE CS180 / CS 180
CS 180 / CS180 – SENSITIVE EDGE CS180 / CS 180
CS120 / cs 120 Resistive sensitive safty edge, according to the European standard EN 12978.The CS 180 has To be installed with CSSENSOR electronic card.
length 180 cm, without caps.It is replaced by the new sensitive coasts:
MECHANICAL ACCESSORIES – SENSITIVE SAFTY EDGE ( RIBS) CARDIN with CODES:
NC8K2Lxxx
BBASLxxN
CPxxBL
BSHxxLxx -
DKS1000 – KIT KEYPAD + ITERFACE 4CH
DKS1000 – KEYBOARD + INTERFACE KIT
DKS1000 – KEYBOARD + INTERFACE KIT consists of two products:
DKS1000T – BACKLIT KEYBOARD
DKS1000R – 4CH INTERFACEDKS1000T – KEYPAD WITH BACKLIGHTING
Surface-mounting IP57.
The metal antitamper keyboard DKS1000T has 12 keys, 10 numerical (0-9), one
confirm key (*) and one cancel key (#) by means of which it is possible to program
the backlighting and other operational parameters.
DKS1000R – 4 CHANNEL INTERFACE
The interface box is easy to install and has the following features:
– power supply 12 or 24Vac-dc;
– 4 normally open relays (one for each channel);
– management of up to 3 peripheral devices (keypads and/or transponder readers;
– 1 multifunction key for the following functions: storing a code, cancelling a code,
cancelling the entire memory content, inserting an activation code for the “remote
memorisation” function. It is possible to store 1000 codes in memory with
a maximum of 6 digits for each code. Each code can activate up to 4 channels
(different functions).€106,00 + TAXDKS1000 – KIT KEYPAD + ITERFACE 4CH
€106,00 + TAX -
DKS1000R – INTERFACE 4CH
DKS1000R – INTERFACE 4CH
DKS1000R 4-CHANNEL INTERFACE
The interface 4CH DKS1000R box is easy to install and has the following features:
– power supply 12 or 24Vac-dc;
– 4 normally open relays (one for each channel);
– management of up to 3 peripheral devices (keypads and/or transponder readers;
– 1 multifunction key for the following functions: storing a code, cancelling a code,
cancelling the entire memory content, inserting an activation code for the “remote
memorisation” function. It is possible to store 1000 codes in memory with
a maximum of 6 digits for each code. Each code can activate up to 4 channels
(different functions).€37,00 + TAXDKS1000R – INTERFACE 4CH
€37,00 + TAX -
DKS1000T – KEYPAD WITH BACKLIGHTING
DKS1000T – KEYPAD WITH BACKLIGHTING
DKS1000T – KEYPAD WITH BACKLIGHTING
Surface-mounting IP57.
The metal antitamper keyboard DKS1000T has 12 keys, 10 numerical (0-9), one
confirm key (*) and one cancel key (#) by means of which it is possible to program
the backlighting and other operational parameters. It is suitable for connection with
the DKS security system via a shielded unipolar wire carrying both the power supply
and the data line. It is also fitted with auxiliary serial line allowing it to connect to the
CARHF2 system (consult the Liberté catalogue).€86,00 + TAXDKS1000T – KEYPAD WITH BACKLIGHTING
€86,00 + TAX -
DKSDUALT – KEYPAD WITH TRANSPONDER
DKSDUALT – KEYPAD WITH TRANSPONDER
DKSDUALT – KEYPAD WITH TRANSPONDER FUNCTION
The DKSDUALT – KEYPAD WITH TRANSPONDER is Surface-mounting IP57.
The DKSDUALT device has the following features:
– 12 keys with backlighting;
– backlighting controlled by the proximity sensor.
Allows the interface to be activated by either typing in a code or by proximity
reading an S500 transmitter, a TAG or a CARD.€91,00 + TAXDKSDUALT – KEYPAD WITH TRANSPONDER
€91,00 + TAX -
DKSTP – KIT TRANSPONDER + INTERFACE
DKS1000T – KEYPAD WITH BACKLIGHTING
DKS1000T – KEYPAD WITH BACKLIGHTING
Surface-mounting IP57.
The metal antitamper keyboard DKS1000T has 12 keys, 10 numerical (0-9), one
confirm key (*) and one cancel key (#) by means of which it is possible to program
the backlighting and other operational parameters. It is suitable for connection with
the DKS security system via a shielded unipolar wire carrying both the power supply
and the data line. It is also fitted with auxiliary serial line allowing it to connect to the
CARHF2 system (consult the Liberté catalogue).€91,00 + TAXDKSTP – KIT TRANSPONDER + INTERFACE
€91,00 + TAX
