MOLE 230

In stock

MOLE 230 / MOLE230 - UNDERGROUND ACTUATOR 230V FOR SWING GATES

MOLE230 - SELF-LOCKING MOTOR IN PHASE OUT
REPLACED BY NEW MODEL : HLXCORE230 MOTOR

MOLE 230 / MOLE230 - UNDERGROUND ACTUATOR 230V FOR SWING GATES
Underground gearmotor MOLE 230 V ideal for swing gates up to 3 meters.
Compatible with CAME embedding cases and old ROCK230 motor with ROCK2HL adaptation kit.
Complete with encoder and easy release for manual operation it is safe, practical and reliable.
Safe and Precise thanks to the encoder and the slowing down in opening and closing
Practical thanks to the control unit with plug-in receiver and self-learning function.
Adjustable mechanical limits in the foundation box.
Reliable thanks to the sturdy mechanical parts and the powerful motor in perfectly water
resistant aluminum shells.

MOLE 230
230 V electromechanical underground gearmotor, for leafs up to 3 m.
It replaces the old model TELCOMA ROCK230 V
Compatible with CAME EMBEDDING CASES
Compatible with old ROCK TELCOMA embedding cases with KIT-ROCK2HL adaptation kit

Compare
SKU: TE-MOLE230 Categories: , ,

MOLE 230 / MOLE230 – UNDERGROUND ACTUATOR 230V FOR SWING GATES

MOLE230 – SELF-LOCKING MOTOR IN PHASE OUT
REPLACED BY NEW MODEL : HLXCORE230 MOTOR

MOLE 230 / MOLE230 – UNDERGROUND ACTUATOR 230V FOR SWING GATES
Underground gearmotor MOLE 230 V ideal for swing gates up to 3 meters.
Compatible with CAME embedding cases and old ROCK230 motor with ROCK2HL adaptation kit.
Complete with encoder and easy release for manual operation it is safe, practical and reliable.
Safe and Precise thanks to the encoder and the slowing down in opening and closing
Practical thanks to the control unit with plug-in receiver and self-learning function.
Adjustable mechanical limits in the foundation box.
Reliable thanks to the sturdy mechanical parts and the powerful motor in perfectly water
resistant aluminum shells.

MOLE 230
230 V electromechanical underground gearmotor, for leafs up to 3 m.
It replaces the old model TELCOMA ROCK230 V
Compatible with CAME EMBEDDING CASES
Compatible with old ROCK TELCOMA embedding cases with KIT-ROCK2HL adaptation kit

UNDERGROUND AUTOMATION FOR SWING GATES

The automation is made up of a series of components consisting of an electronic
programmer, one or two sealed self-locking operators complete with embedding
cases and a special 2-metre long connecting cable.

The robust and reliable electromechanical operator guarantees optimum
performance under all working conditions and its system of ball bearing
balanced pivoting levers guarantees regular and silent running. Internally the
automation is fitted with highly resistant cast iron helicoidal gears.
The hot dip galvanized or stainless steel embedding cases are guaranteed to
remain rust free throughout time.

Particularly suited for installations that do not allow column installations or where
the automation has to be completely hidden with the possibility of reaching an
opening angle up to 360° (with an optional accessory).
The units do not feature on board electronics and we advise you to use a TELCOMA
electronic programmer control unit:
– Cardin T600 for 1 or 2 230V motors;
– Cardin T624 for 1 or 2 24V motors;

On the MOLE24 V model gate position is encoder controlled with the use of mechanical
travel limits and self-programming thus reducing installation times to a minimum
and optimising the programming procedure. Repositioning takes place
automatically whenever foreign objects get in the way of the gate as it is moving.
The electronic control unit is completed by the anti-crush and “soft start” and “soft
stop” functions.

The reversible geared motor guarantees that the gate will remain blocked when
closed. The manual emergency movement system is easy to operate using the
personalised “locking-unlocking” key or a lever operated system and rearming is
automatic.

TECHNICAL SPECIFICATIONS  MOLE 230

Motor power supply                                              230 V
Max. motor current                                              2 A
Motor power                                                        370 W
Max. torque                                                         500 Nm
Max gate weight                                                   450 Kg
Work cycles                                                         30%
Max. gate length                                                  3500 mm
Max opening                                                        115°
Encoder                                                              NO
Mechanical stops                                                 NO
Grease lubricant                                                  TS10
Compatible with CAME embedding cases

GENERAL DATA MOLE MOLE230
Working temperature                                    -20 +55 °C
Protection level                                            IP 67
Weight                                                        12 Kg

ACCESSORIES MOLE 230

ELV
Vertical/horizontal electric lock 12 V.

T201 / T600
Control unit for 1/2 motors 24 V, with encoder control, torque adjustment and slowing down.

SERIE OC2
2 channels plug in receiver.

KIT-ROCK2HL
Motor adapter kit MOLE230 or MOLE MOLE 24
to the old embedding cases of the TELCOMA ROCK and ROCK230 motors

BLA
Leaf stopper.

SUPBAT
Pair of brackets to fix 2 BAT12V2A to the cover of control units box.
BAT12V2A
Battery 12V 2Ah.
CB24
24 V battery charger. Suitable for 24 V control units.

ACCMOLE 360
Accessory for opening up to 360°, complete with pinion and chain.

SBLMOLE
Release system with tri-lobed key.

SUN POWER
Solar power kit with solar panel and battery.
Suitable for 24V gearmotor

Additional information

Weight 20 kg
Dimensions 0,50 × 0,50 × 0,40 m
Be the first to review “MOLE 230”

Your email address will not be published. Required fields are marked *

CAPTCHA ImageChange Image

Reviews

There are no reviews yet.

See It Styled On Instagram

    No access token

Main Menu