HLXCORE230 UNDERGROUND MOTOR

HLXCORE230 / HLXCORE 230 – UNDERGROUND ELECTROMECHANICAL MOTOR 230V

HLXCORE230 / HLXCORE 230 – SELF-LOCKING UNDERGROUND MOTOR WITH ENCODER 230V
SWING GATES MAX WEIGHT. 550KG

ELECTROMECHANICAL OPERATOR HLXCORE230
– 230V MOTOR FOR GATES
– 110° MAXIMUM OPENING ANGLE
– GATE MAX 3M
– GATE MAX 550KG
Self-locking operator:
– fitted with a crank rod transmission system;
– supplied with a 6m connection cable;
– embedding case and Cardin electronic programmer to be ordered separately.

HLXCORE230 – UNDERGROUND ELECTROMECHANICAL MOTOR 230V

The automation is made up of a series of components consisting of an electronic
programmer, one or two sealed self-locking operators complete with embedding
cases and a special connecting cable. The robust and reliable electromechanical
operator guarantees optimum performance under all working conditions and its
system of ball bearing balanced pivoting levers guarantees regular and silent
running.

The hot dip galvanized or stainless steel embedding cases are guaranteed to
remain rust free throughout time.
Particularly suited for installations that do not allow column installations or where
the automation has to be completely hidden.
The units do not feature on board electronics and we advise you to use a Cardin
electronic programmer:
– PRG230M2 for 1 or 2 230V motors;
– CC242ETOPCB – CC242EXTOPCB for 1 or 2 24V motors;

On the 24V model swing gates position is encoder controlled and self-programming
thus reducing installation times to a minimum and optimising the programming
procedure. Repositioning takes place automatically whenever foreign objects get
in the way of the gate as it is moving.

The electronic control unit is completed by the anti-crush and “soft start” and “soft
stop” functions. The control electronics also comes complete with a display that
monitors the programming stages and counts the number of manoeuvres carried
out by the machine.

The irreversible reduction system guarantees the blocking of the gate in the closed position.
The manual emergency movement system is easy to operate using a personalised
“locking-unlocking” key and rearming is automatic.

SELF-PROGRAMMING ECU FOR HLXCORE230

Programmer for the control of two motors.
Motor power supply 230Vac.
Maximum power yield for two motors 470 + 470 W.
The appliance is fitted with an interface for the insertion of a standard Cardin
radio receiver card. For more information turn to page 174.

SELF-PROGRAMMING ECU FOR HLXCORE230

Programmer for the control of two motors with HL251CL encoder.
230Vac power supply.
230Vdc motors output.
Maximum absorbed power 470W.
Equipped with S449-S486-S504-S508 multi-decoding module.
Compatible with the INTPRG-3G / WF system which allows control and
programming of system parameters from remote locations.

TECHNICAL FEATURES OF THE UNDERGROUND ACTUATOR HLXCORE230 HLXCORE 230

OPERATOR SPECIFICATIONS
Motor power supply                                          V 230Vac
Electrical input                                                 A 1,9
Power input                                                     W 470
Duty cycle                                                        % 20
Opening time 90°                                              s 19,5
Opening time 110°                                              s 25
Openin    g time 140°                                          s 30
Opening time 180°                                              s 35
Maximum torque                                                Nm 290
Protection grade                                                 IP 67

PRG230M2 : SELF-PROGRAMMABLE ELECTRONIC PROGRAMMER

T600 : SELF-PROGRAMMABLE ELECTRONIC PROGRAMMER

CABPC10 : 10m CABLE
with end sleeves for HL2524ESB – HL1824ESB.

EMBEDDING CASES
complete with connection lever and adjustable mechanical travel limits.
All versions are fitted with a stainless steel cover.
HLBOX – Hot dip galvanized anti-rust treatment, manual release mechanism
to be ordered separately.
HLBOXI – Structure completely in stainless steel, manual release mechanism
to be ordered separately.
HLBOXC – Hot dip galvanized anti-rust treatment, release mechanism with a
personalised key included in the embedding case lever unit (not compatible
with ACCHLXCORE360).

SBLHL : MANUAL RELEASE MECHANISM
with a personalised key for HLBOX-HLBOXI

SBLSHL : MANUAL RELEASE MECHANISM
activated by means of a lever for HLBOX-HLBOXI

ACCHLXCORE360
ACCESSORY FOR 360° OPENING
NON COMPATIBLE WITH HLBOXC

ACCHLXCORE360C
ACCESSORY FOR 360° OPENING
COMPATIBLE WITH HLBOXC